How To Remove Stain From Fiberglass Door

Applied to your fiberglass front door, stain provides long-lasting protection and a beautiful finish that boosts your home's adjourn appeal. In today's tutorial, we'll discuss the process for applying Bartley gel stain to your fiberglass forepart door.

Materials

• Sawhorses (2)
• Mineral Spirits
• Rags
• Painter's Tape
• Plastic Bags
• Screwdriver
• Pigment Stirrer
• Tarp
• Gel Stain
• Polyurethane
• Paintbrush

Procedure

1. Remove the door from the hinges. To do this, button the hinge pins upward until the door is no longer secure, then pull the door away from the frame. Put the hinge pins back in the hinges so they won't be lost.
2. Take the door to a well-ventilated location. Lay the door down horizontally on two saw horses in your garage or in some other well-ventilated spot.
3. Make clean the door. Moisture a rag with mineral spirits, and then use the rag to remove dirt and crud from the door. Be sure to clean out the corners and edges of the door, where the grime can hands become trapped. Keep when the door is fully dry and mineral spirits can no longer exist smelled.
4. Tape or cover any parts of the door that should not be stained. Apply painter's record and plastic numberless to cover whatever windows on the door.
5. Remove hardware from the door. Use a screwdriver to remove the handle and hinges from the door. Put the hinges in plastic bag to keep them independent and prevent them from becoming lost.
6. Open up and stir the stain. Utilize a paint stick to stir the stain in the can. Practice this over a tarp in case the stain spills on the floor.
7. Utilise the stain. Dip a rag into the gel stain, then use the rag to apply the offset coat to the front end door. Start from the inside of the door and work your style to the exterior. Apply the stain with brush strokes that go in the management of the panels on the door.
8. Wipe off excess stain. Once the excess stain has been removed, allow the stain to sit and dry for the manufacturer'south recommended length of time.
9. Employ a 2nd coat if desired. Applying a second coat of stain to the door will deepen the color. This is merely necessary if a deeper, richer stop is desired.
10. Utilise polyurethane. Utilize a paint castor to employ a layer of polyurethane over the finish. Allow the polyurethane to dry according to the manufacturer's instructions. Apply a second glaze when the offset coat is completely dry, and so wait for the second glaze to dry.
11. Flip the door and repeat the procedure. Flip the door on the saw horses to reveal the unstained side. As you lot did with the other side of the door, cover the sides of the door that yous don't want to be touched by stain. Use the stain using the aforementioned process, then apply 2 layers of polyurethane and wait for them to dry fully.

Once the door is dried and finished, you can remove the record and reattach the hardware. The finish on your fiberglass front door will terminal for a yr before the polyurethane needs to be reapplied.

Nosotros've tried to brand this tutorial as comprehensive as nosotros tin, but for more advice on this project, we recommend taking a wait at this helpful online tutorial.

Finish by Ace Paint for Your Stain and Other Painting Materials

Bartley gel stain is a quality production that can be acquired at Ace Pigment and Unfinished Furniture. Stop in today for gel stain and all your other painting supplies, so you'll be gear up to get started when the fourth dimension comes to pigment your front door.

Source: https://www.acepaintsfurniture.com/stain-a-fiberglass-door-like-a-pro

Share this post